Looking to unclog bathtub drains that are constantly being blocked by hair? Look no further! In this video tutorial by gregvancom, you’ll find an easy and efficient method to remove hair and ensure your drains are clear. The video begins by demonstrating the step of removing any type of plug cover or plug to access the hair. Using tools like a small screwdriver or knife, the video shows how to carefully work out the hair from the drain, emphasizing the importance of using tools that won’t fall down the drain. The process may require some patience and creativity, but it’s definitely doable without the need to call a plumber. So grab your tools and get ready to say goodbye to those clogged drains once and for all!
How to Unclog Bathtub Drains by Removing Hair
Introduction
Have you ever experienced a slow-draining bathtub? It can be frustrating and inconvenient, especially when you’re in a hurry. One common culprit for clogged drains is hair. Hair tends to accumulate over time and can cause blockages, preventing water from flowing freely down the drain. Luckily, unclogging your bathtub drain by removing hair is a relatively simple task that you can easily do yourself. In this article, we will provide a step-by-step guide on how to unclog most bathtub drains effectively.
Tools Needed
Before we get started, let’s gather the necessary tools for the job. You will need the following items:
- Screwdriver or knife
- Tweezers or vacuum
- Scissors
- Washcloth
- Magnifying glass (optional)
These tools will help you remove the hair clogging your bathtub drain efficiently.
Step 1: Remove the Plug Cover
The first step in unclogging your bathtub drain is to remove the plug cover. This can be done by unscrewing or lifting the cover, depending on the type of plug you have. Once the cover is removed, you will be able to access the drain and see the hair that may be clogging it. In some cases, you may notice hair wrapped around the drain cover bars or adhered to the drain chrome bars.
Step 2: Use a Screwdriver or Knife to Remove Hair
With the plug cover removed, you can now start removing the hair. You can use a screwdriver or a knife to carefully work the hair out of the drain. Be sure to use a tool that is not small enough to fall down the drain, as you don’t want to create additional problems. Use the screwdriver or knife to gently loosen the hair and pull it out. Depending on the amount of hair and its location, you may need to use a combination of tools to effectively remove it.
Step 3: Use Tweezers or Vacuum to Remove Hair
If there are still remnants of hair in the drain after using a screwdriver or knife, you can try using tweezers or a vacuum to remove it. Tweezers are especially helpful for grabbing smaller pieces of hair that can be difficult to reach with other tools. Alternatively, using a vacuum with a narrow nozzle attachment can help pull the hair out of the drain, making it easier to grab and remove.
Step 4: Cut the Hair if Necessary
In some cases, the hair may be too long or tangled to remove in one piece. If this is the case, you can use scissors to cut the hair into smaller sections. Cutting the hair will make it easier to work with and remove from the drain. Be careful not to cut yourself or damage the drain while cutting the hair.
Step 5: Clean the Drain and Parts
Now that you have removed the hair, it’s important to clean the drain and its parts thoroughly. Use a washcloth or a brush to scrub away any remaining debris or residue. Some parts may be difficult to clean with the plug cover on, so make sure to remove it if necessary. A magnifying glass can be helpful in spotting any small pieces of hair that may have been missed during the cleaning process.
Step 6: Reassemble and Test
Once you have cleaned the drain and its parts, it’s time to reassemble everything. Put the plug cover back in place and ensure that it is securely fastened. To test if the unclogging process was successful, run some water down the drain and see if it drains freely. If the water flows smoothly, congratulations! You have successfully unclogged your bathtub drain. If not, you may need to repeat some of the previous steps or consider calling a professional plumber for further assistance.
Preventive Measures
To prevent future clogs caused by hair, there are a few preventive measures you can take. Consider using a drain cover or hair catcher to trap hair before it goes down the drain. Regularly cleaning the drain cover and removing any trapped hair can help prevent blockages. Additionally, brushing your hair before showering or bathing can reduce the amount of hair that ends up in the drain.
Conclusion
Unclogging bathtub drains by removing hair is a task that can be easily accomplished with the right tools and steps. By following the step-by-step guide provided in this article, you can effectively remove hair clogs and ensure that your bathtub drains properly. Remember to take preventive measures to minimize future clogs caused by hair. With a little time and effort, you can enjoy a fully functional bathtub drain and a hassle-free bathing experience.
